+86-15221358017 / 15221358018 /15221358066/13916032681 info@purilaser.com
Views: 3 Author: Site Editor Publish Time: 2026-01-14 Origin: Site
For many workshops and manufacturers, a 130W CO2 laser tube sits right in that practical middle zone. Strong enough to cut thicker materials. Stable enough for long working hours. Not oversized. Not inefficient. So what does a 130W CO2 laser tube actually bring to a laser machine? Let’s break it down, the way buyers usually think about it. What Can a 130W CO2 Laser Tube Do in Real Work? In daily production, a laser machine lives or dies by consistency. A well-built 130W CO2 laser tube is commonly used for: Cutting acrylic sheets around 15–20 mm with noticeable speed improvement Continuous cutting of wood, MDF, plywood without frequent stops Leather, rubber, non-metal composites, batch after batch Faster engraving when time matters more than ultra-fine detail Many users upgrade from 100W to 130W for one reason: An Indian customer using signage machines shared this exact experience. After switching to 130W CO2 laser tubes from Puri Laser, cutting speed improved, but more importantly, downtime dropped. Machines stayed online longer. Output per day went up. That’s usually the real reason behind the upgrade. Why 130W Is a “Comfort Zone” for Many Laser Machines Some buyers ask: Fair question. But higher power also means: more heat stress higher demands on cooling stricter alignment requirements A 130W CO2 laser tube works comfortably with standard water chillers and common laser machine structures. No extreme setup changes. No extra complexity. For small and mid-size factories, this matters. The Tube Matters More Than the Number Here’s something experienced users learn fast: Not all 130W CO2 laser tubes behave the same. Two tubes, same length, same rated power — very different results. What really matters: beam stability over time power consistency during long runs gas quality and sealing process electrode treatment factory testing standards This is where the CO2 laser tube factory behind the product becomes important. Inside a CO2 Laser Tube Factory: How Puri Laser Approaches 130W At Puri Laser, the focus isn’t just on hitting 130W during testing. As a dedicated CO2 laser tube factory, Puri Laser controls: glass tube processing metal-to-glass sealing gas filling mirror alignment aging and power testing Every 130W CO2 laser tube is tested under working conditions, not just short bursts. This is why many long-term buyers choose factory-direct supply instead of trading channels. One customer summed it up simply: Is a 130W CO2 Laser Tube Right for Your Machine? Ask yourself a few things: Are you cutting acrylic thicker than 10 mm regularly? Do you run long jobs, not short demos? Do you want speed gains without redesigning your machine? If the answer is yes, a 130W CO2 laser tube is often the logical step. Not oversized. Not risky. Just practical. Final Thought: Power Is Only Useful When It’s Stable A laser machine doesn’t need the highest wattage. That’s where factory experience matters.
Not peak power. Not brochure data.
less waiting, fewer interruptions.
“Why not go straight to 150W or higher?”
You get higher throughput without pushing the machine too hard.
It’s on keeping output stable after months of use.
“The tube doesn’t feel stressed.”
That’s a good sign.
It needs a CO2 laser tube that works the same today, tomorrow, and months later.
